1. If the diamond grinding wheel is not used immediately, it should be placed horizontally or hung up by using the inner hole. Other objects or feet should not be stacked on the flat saw blade, and attention should be paid to moisture prevention and corrosion prevention.
2. When the diamond grinding wheel is no longer sharp and the cutting surface is rough, it must be reground in time. Grinding cannot change the original angle and destroy the dynamic balance.
3. The inner diameter correction and positioning hole processing of diamond grinding wheel must be carried out by the manufacturer. If the processing is poor, it will affect the use effect of the product and may cause danger. In principle, the reaming should not exceed the original hole diameter by 20mm to avoid affecting the stress balance




